9088-200, WHITE, 50M X 50MM 数据手册
Double sided adhesive tape 9088-200
Product Data Sheet
January 2019
Supersedes: May 2017
Product Description
Double sided adhesive tape with polyester carrier and modified
acrylic adhesive
Key Features
•
•
•
•
•
•
Application ideas
High adhesion to nearly every high and low surface energy
substrate
High initial tack
All purpose tape
Good UV resistance
High shear and temperature resistance
Easy handling and converting due to polyester carrier
•
•
•
Self- adhesive mounting of furniture trim, sealing profiles
and cable ducts
Bonding and mounting of sales displays and billboards
Fixing of decorative trims and emblems
Construction
Adhesive Type
Modified Acrylic
Adhesive side open face 1
0,09 mm
Adhesive Carrier
Transparent PET 0,012 mm
Adhesive back side 2
0,09 mm
Tape Colour
colourless
Total thickness without liner
0,20 mm
Release Liner
Glassine paper, white 94 g/m²
0,08 mm
1 open face side is visible when unwinding the roll.
2 the back side is visible after removing the liner
Calipers are average values
9088-200
January 2019
Performance Characteristics
Adhesion to Stainless Steel - [N/25 mm]
29
Finat FTM1 - (72h RT, 180° peel angle, 300mm/min,
Haul-off speed, 0,05 mm PET)
Adhesion to Polypropylene - [N/25 mm]
26
Finat FTM1 - (72h RT, 180° peel angle, 300mm/min,
Haul-off speed, 0,05 mm PET)
Adhesion to Polycarbonate - [N/25 mm]
20
Finat FTM1 - (72h RT, 180° peel angle, 300mm/min,
Haul-off speed, 0,05 mm PET)
Adhesion to ABS - [N/25 mm]
24
Finat FTM1 - (72h RT, 180° peel angle, 300mm/min,
Haul-off speed, 0,05 mm PET)
Static Shear Resistance to Stainless Steel - [min]
> 10.000
Finat FTM8 - (RT, 1 kg/1”x1”)
Static shear resistance to stainless steel - [min]
> 10.000
Finat FTM8 - (at 90 °C, 0,5 kg/1”x1”.)
Temperature resistance
Pass
SAFT - (40-180 °C; 2°C/min) 500g /1”x1”)
Solvent Resistance (KBA, Issue March 2014)
Media
Substrate
Immersion
time [h]
Deionized Water
5 % Hydrochloric
Acid
1% Sodium hydroxid
Ethyl Alcohol
Glass
1
Immersion
temperature
[°C]
50 ± 2
Glass
1
20 ± 2
no change
good adhesion
Glass
Glass
0,50
0,25
20 ± 2
20 ± 2
slight delamination of edges
sample slightly moved
good adhesion
good adhesion
Premium gasoline,
lead - free
Aluminium
0,3
20 ± 2
slight leakage of adhesive
adhesive edge swelled (5 %)
good adhesion
(95 %)
Diesel
Aluminium
0,5
20 ± 2
slight leakage of adhesive
adhesive edge swelled (5 %)
good adhesion
(95 %)
Methyl-Ehyl-Ketone
Aluminium
0,5
20 ± 2
slight leakage of adhesive
adhesive edge swelled (5 %)
good adhesion
(95 %)
Motor oil (HD Oil)
5 %Tenside
(amphoteric,an-ionic
nonionic) in H2O
Aluminium
1,00
20 ± 2
no change
good adhesion
Glass
0,5
20 ± 2
no change
good
adhesion
Visual assessment after
48h reconditioning at RT
no change
Temperature resistance
Storage & Shelf Life
Short term (minutes, max.1 hour): -40 °C – 150 °C
Long term (days, weeks): 90 °C
Store at 16 °C – 25 °C and 40-65 % relative humidity in its
original box. The product can be stored up to 24 months after
production.
Note: The shelf life may be shortened if the original packaging is
not properly sealed or stored in an environment with high
temperatures or humidity
Precautionary Information
Refer to product label and Material Safety Data Sheet for health and
safety information before using the product.
For information please contact your local 3M Office.
www.3M.com
For Additional Information
To request additional product information or to arrange for sales
assistance, call……
Address correspondence to: 3M
Important Notice
All statements, technical information and recommendations
contained in this document are based upon tests or experience that
3M believes are reliable. However, many factors beyond 3M’s
control can affect the use and performance of a 3M product in a
particular application, including the conditions under which the
product is used and the time and environmental conditions in which
the product is expected to perform. Since these factors are uniquely
within the user’s knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular
purpose and suitable for the user’s method or application. All
questions of liability relating to this product are governed by the
terms of the sale subject, where applicable, to the prevailing law
Values presented have been determined by standard test methods and are average values not to be used for
specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but
we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M
cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our
recommendations
3M United Kingdom PLC
2M Centre, Cain Road, Bracknell
RG12 8HT
United Kingdom
3M Svenska AB
Herrjärva torg 4
170 67 Solna
Sweden
3M Eesti OÜ
Pärnu mnt. 158
11317 Tallinn
Estonia
3M Ireland Ltd
The Iveagh Building, 3rd Floor
The Park, Carrickmines 18
Ireland
3M a/s
Hannemanns Allé 53
DK-2300 Copenhagen S.
Denmark
3M Latvia SIA
K.Ulmaņa gatve 5
Rīga, LV-1004
Latvia
3M Belgium bvba/sprl
Hermeslaan 7
1831 Diegem
Belgium
3M Norge AS
Tærudgata 16
2004 Lillestrøm
Norway
3M Lietuva UAB
A.Goštauto g. 40
Vilnius LT- 03163
Lithuania
3M Nederland B.V.
Molengraaffsingel 29
2629 JD Delft
The Netherlands
Suomen 3M Oy
Keilaranta 6
02150 Espoo
Finland